Catalan vaults have always been popular in many countries. Architects such as Gaudi have made the Catalan vault a success worldwide. Substantially these vaults are built with bricks such as the “raisilla”, a thin brick that can have a thickness of one centimeter. The basic idea of Catalan vaulting technique is that a center is not necessary because, given the reduced weight of the rasilla and the nature of the mortar used for joints (often rich in gypsum), the first layer of the vault will be quickly assembled and will support the further layers and the workers. While the idea of having the joint of each new layer of the vault rotated of 45 degrees with respect to the previous layer’s joint has generally been kept, in the modern Catalan vault a mesh (steel or composite) it is often introduced, between the two external layers of bricks. This mesh operates by distributing the loads and increasing the strength against the effect of asymmetric or concentrated loads. This paper presents a study made on a new type of Catalan vault made with much thicker and stronger bricks that abandon the idea of rotating the joint direction. The vaults were firstly studied using a FEM model and then specimens of the vaults were tested in compression, flexion and shear. The results obtained were compared with more classical Catalan vault. The results seem to confirm that the Catalan technique is a fast and interesting vaulting method for modern construction.