Pool boiling on plain and enhanced surfaces

Da Silva Lima, Ricardo J. (Laboratoire de transfert de chaleur et de masse, EPFL, Lausanne, Switzerland) ; van Rooyen, Eugene (Laboratoire de transfert de chaleur et de masse, EPFL, Lausanne, Switzerland) ; Thome, John M. (Laboratoire de transfert de chaleur et de masse, EPFL, Lausanne, Switzerland)

In this chapter the main aspects of the heat transfer phenomena of nucleate pool boiling with smooth and enhanced surfaces are presented and discussed. This chapter first covers pool boiling on smooth surfaces and afterwards pool boiling on enhanced surfaces. Also, a section on boiling of refrigerant mixtures presents a method to calculate the effects of mass transfer of refrigerant mixtures on the pool boiling heat transfer. For both smooth and enhanced surfaces, first are described the physical processes guiding the heat transfer phenomena. These points are then illustrated by a set of experimental data which allows one to observe the effect of each experimental parameter on the heat transfer process. A set of selected nucleate pool boiling heat transfer correlations is then presented, discussed and compared. Through this presentation, the most important aspects of nucleate pool boiling will be highlighted and explained, and thus provide a guide to the selection of the most appropriate prediction model for the application.


Note: DA SILVA LIMA, Ricardo J. est chercheur à la HES-SO, HEPIA, depuis 2013.


Article Type:
scientifique
Faculty:
Ingénierie et Architecture
School:
HEPIA - Genève
Institute:
inPACT - Institut du Paysage, d'Architecture, de la Construction et du Territoire
Date:
2015-06
Published in:
Encyclopedia of Two-Phase Heat Transfer and Flow II
Numeration (vol. no.):
2020, vol. 2, pp. 53-100
DOI:
ISBN:
978-981-4623-31-5
Appears in Collection:



 Record created 2020-08-11, last modified 2020-10-27


Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)