Flow pattern-based boiling heat transfer and frictional pressure drop models for plain horizontal tubes

Da Silva Lima, Ricardo J. (Laboratoire de transfert de chaleur et de masse, EPFL, Lausanne, Switzerland) ; Thome, John M. (Laboratoire de transfert de chaleur et de masse, EPFL, Lausanne, Switzerland)

This chapter covers flow pattern based models for evaporating flows inside plain horizontal smooth tubes. First, the various fundamental elements of two-phase flows are presented, which are the building blocks of flow pattern based models. Then, the flow pattern map of Wojtan et al. (2005b) is presented and described. Next, the flow pattern map based boiling heat transfer model of Wojtan et al. (2005c) is presented and then finally the flow pattern based frictional pressure drop model of Da Silva Lima and Thome (2012c) is described. For all presented models, a parametric study is then provided, including graphical outputs that will help the reader understanding and implementing these models.


Note: DA SILVA LIMA, Ricardo J. est chercheur à la HES-SO, HEPIA, depuis 2013.


Article Type:
scientifique
Faculty:
Ingénierie et Architecture
School:
HEPIA - Genève
Institute:
inPACT - Institut du Paysage, d'Architecture, de la Construction et du Territoire
Date:
2015-06
Published in:
Encyclopedia of Two-Phase Heat Transfer and Flow II
Numeration (vol. no.):
2020, vol. 2, pp. 355-394
DOI:
ISBN:
978-981-4623-31-5
Appears in Collection:



 Record created 2020-08-11, last modified 2020-10-27


Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)