The present study describes two methods of evaluation of hazard indicators such as Self Accelerating Decomposition Temperature (SADT) or Time to Maximum Rate under adiabatic conditions (TMRad) from the results of the experiments performed in mg scale by Differential Scanning Calorimetry (DSC). We discuss here: (i) the kinetic workflow in which the kinetic parameters of the investigated reaction evaluated from the DSC are used with the heat balance of the system and (ii) a novel merging approach in which DSC data are simultaneously considered with the results of other, temperature recorded experiments as e.g. Accelerating Rate Calorimetry (ARC), large scale experiments as e.g. cookoff, Dewar or SADT determination according to STANAG 4383 and UN regulations (Tests H.4 and H.1), respectively. The commonly kinetic-based approach is discussed and its results confirmed by those obtained in common project with Federal Institute for Materials Research and Testing, Berlin, Germany (BAM) in which the SADT for AIBN was investigated. The novel merging approach is illustrated by the results of the linked DSC-UN test H.1 data and DSC-ARC results applied for SADT determination and for evaluation of TMRad for any starting temperature for AIBN.