Tape casting of bronze-graphite sheets for tribological applications
Bidaux, Jacques-Eric; Sonney, V.; Hamdan, H.; Carreno-Morelli, Efrain; Bonjour, C.; Bosc, Pierre
2010

Résumé

The fabrication of bronze and bronze-graphite sheets by tape casting has been investigated. Slurries composed of powder, solvent, plasticizer and binder have been used. Green tapes have been produced, debinded and sintered. Pressureless sintering and hot pressing have been used for consolidation. The density of the sintered sheets depends on the sintering method and on the presence of graphite. Optical and scanning electron microscopy observations show a uniform dispersion of the graphite lubricant. The sheets are malleable. Pin-on disc tests show improved tribological properties.

Détails

Titre Tape casting of bronze-graphite sheets for tribological applications
Auteur(s)/ trice(s) Bidaux, Jacques-Eric (School of Engineering, HES-SO Valais-Wallis, HEI, HES-SO University of Applied Sciences Western Switzerland)
Sonney, V. (School of Engineering, HES-SO Valais-Wallis, HEI, HES-SO University of Applied Sciences Western Switzerland)
Hamdan, H. (School of Engineering, HES-SO Valais-Wallis, HEI, HES-SO University of Applied Sciences Western Switzerland)
Carreno-Morelli, Efrain (School of Engineering, HES-SO Valais-Wallis, HEI, HES-SO University of Applied Sciences Western Switzerland)
Bonjour, C. (ChirMat Sàrl, Monthey, Switzerland)
Bosc, Pierre (Kugler Bimetal SA, Le Lignon, Switzerland)
Date 2010-10
Publié dans Proceedings of PM2010 World Congress, 11-14 October 2010, Florence, Italy
Volume 2010, vol. 2, pp. 709-714
Editeur Florence, Italy, 11-14 October 2010
Pagination 6 p.
Présenté à PM2010 World Congress, Florence, Italy, 2010-10-11, 2010-10-14
Type de papier published full paper
Domaine Ingénierie et Architecture
Ecole HEI-VS
Institut Institut Systèmes industriels
Le document apparaît dans Documents de conférences
Global

Actions

PDF